LINK Engine Management

The MonsoonX has been upgraded to provide 512 megabytes of data logging, meaning you can log much more data at a faster sample rate. Control loops are also more precise compared to its G4+ predecessor, along with advancements such as single precision floating point...

A premium ECU with Onboard Digital Wideband. The FuryX is a premium ECU like the XtremeX, but with added Onboard Digital Wideband Lambda Control. Now on the G4X platform, the FuryX features a faster processor, faster communications & a huge 512 megabytes of data...

The quickest, easiest, tidiest and most cost effective way to connect a Link ECU to your Drive-by-Wire/E-Throttle LS V8 engine.  Bundle Includes: G4X XtremeX ECU (8 x Injector and 8 x Ignition Drives) Terminated Engine Harness GM LS GEN3/4* LS DBW Adapter Loom *Notes...

The quickest, easiest, tidiest and most cost effective way to connect a Link ECU to your Drive-by-Cable LS V8 engine.  Bundle Includes: G4X StormX ECU (8 x Injector and 8 x Ignition Drives) Terminated Engine Harness GM LS GEN3/4* LS Stepper Adapter Harness *Notes...

Designed for the 1992-1995 Honda B16 and B18 engine. All models that use the Honda "OBD1" ECU. Please check your connector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. No onboard MAP sensor.  Knock control is...

Designed for the 1996-1998 Honda B16 and B18 engine. All models that use the Honda "OBD2A" ECU.  Please check your connector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. Onboard MAP sensor not included Most factory features...

Designed for the K20A engine.Please check your connector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. ECU includes an onboard 7 bar MAP sensor.  Most factory features are supported.  Check the features tab for I/O expansion options  Note: This Plug-in...

This ECU is designed for the E36 M50TUB25 engine. Please check your connector matches the header in the listed photo before purchasing. This ECU only works with the Engine Code M50TUB25 (Bosch ECU from factory).  Works with manual & automatic transmissions.   Built in 4 Bar...

Link's highly anticipated PDM, the Razor PDM, is an intelligent Power Distribution Module that replaces traditional fuses and relays, putting you in complete control of your setup.The Razor PDM is a programmable device that uses logic for the smart control of any outputs you...

Dual core screen cable for use with trigger signals and knock sensors - 10m per pack

5 m long 'B' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilizing Link WireIn ECUs. The 'B' Loom has a Link 'B' ECU connector at one end and unterminated wires at the other. All wires are colour coded...

5m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilizing Link WireIn ECUs. The 'A' Loom has a Link 'A' ECU connector at one end and unterminated wires at the other. All wires are colour coded to...

2.5 m long 'B' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilizing Link WireIn ECUs. The 'B' Loom has a Link 'B' ECU connector at one end and unterminated wires at the other. All wires are colour coded...

2.5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilizing Link WireIn ECUs. The 'A' Loom has a Link 'A' ECU connector at one end and unterminated wires at the other. All wires are colour coded...

0.4m long 'B' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The 'B' Loom has a Link 'B' ECU connector at one end and unterminated wires at the other. All wires are colour coded...

0.4m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilizing Link WireIn ECUs. The 'A' Loom has a Link 'A' ECU connector at one end and unterminated wires at the other. All wires are colour coded...

3 port boost control solenoids are the go-to for the majority of boost control applications, they allow for precise control of boost and boost levels can be raised to around 2-3 times the spring pressure of the wastegate.Features: Compatible with all Link and other...

Want to add additional inputs/output to your Link Plugin ECU? Use the XS Loom. The Link XS Loom plugs into the expansion connector on all Link G4, G4+ and G4X plug-in ECUs. The number of extra inputs and outputs added by the XS Loom...

Designed for the 3SGE Beams engine in the models specified below.Please check your connector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. ECU includes an onboard 4 bar or 7 bar MAP sensor Most factory features...

Designed for the 3SGTE engine in the models specified below. Please check your pinout connector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. ECU does not fit in the original housing of non-turbo cars Most factory features...